Eaton LoadStar-S JSB Mounting And Operating Instruction page 37

16.4. Table Circuit Setup (Login = Uninstructed specialist)
Ope- Icon
rating
steps
2
3
4
5
6
7
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
16.4. Table Circuit Setup (Login = Uninstructed specialist)
Function
Icon Menu
Icon Circuit Setup
Icon circuit mo-
dules
(max 40 modules)
Search for Ext.
modules. (SOU
modules moun-
ted outside the
LoadStar-S)
Icon Circuits
(Max. 4 circuits per
module)
Icon General
To configure the
switching and
monitoring func-
tion and luminaire
search.
Icon switch 1
To configure the
circuit type of the
circuit.
Entries
Actuate
Actuate
The module Icon Actuate which
should be configured.
Activate the circuit icon to be confi-
gured.
Max. two switches can be assigned.
The circuit can be configured as reser-
ve, CG or circuit monitored.
The luminaire search icon (luminaires
must be addressed) automatically
registers all connected luminaires.
The Search for new luminaires icon
automatically registers all subsequent-
ly installed luminaires.
Ready light = All lights are switched
off and switch on automatically at
power failure.
Permanent light= All lights are on
continuously.
37