Eaton LoadStar-S JSB Mounting And Operating Instruction page 41

16.7. Table configure ACU settings (Login = Expert)
Ope- Icon
rating
steps
1
2
3
4
5
6
7
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
16.7. Table configure ACU settings (Login = Expert)
Function Entries
Icon Menu Actuate
Icon Basic settings Actuate
Icon ACU settings Actuate
Icon Relay settings Actuate
Icon Relay 1 – 4 Select the event icon and assign it to
and Summer. the relay / buzzer.
At Actuate is reset to factory setting.
Icon Default Values
Load Special configuration for Deutsche
Bahn
Icon DB-FUB
Icon Inputs Set- Actuate
tings
The following Use the arrow icons to select a func-
function can be tion.
assigned to each
input:
- No Function
- Switch
- Switch inverted
- manual reset
- Confirm deep discharge
- FT-Start
- BT-Start
- BT/FT cancel
- Block device
- Switch off continuous light
- Switching on the ready light
- fan monitoring
- Ext. ISO Monitor
- Ext. Battery Monitor
- Ect. Monitor
- All Luminaires ON
- AE Szenario active
- AE disruption
- power outage UV
41