Charge Voltage Setting Table (Login=Expert) - Eaton LoadStar-S JSB Mounting And Operating Instruction

16.9. Charge voltage setting table (Login=Expert)

This setting is made at the factory and only needs to be adjusted if a different type of battery is used.
Operating Icon
steps
1
2
3
4
5
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
16.9. Charge voltage setting table (Login=Expert)
Function Entries
Icon Menu Actuate
Icon Actuate
General setup
Icon Charger/Bat- Actuate
tery setup
Icon Battery setup Go to Icon Battery Settings and press
Icon Battery ca- Enter the nominal capacity of the
pacity battery at +20°C, 1.8V/Z and C10.
Number of blocks Enter the number of battery blocks
per battery Enter the float charge voltage per cell
Trickle charging in mV.
Number of cells Enter the number of cells per battery
per block block.
43