Eaton LoadStar-S JSB Mounting And Operating Instruction page 56

20 ACU Module
ACU settings Relay contacts
Name
Mains operation
Mains failure
Mains failure SubDB
Charging failure
Circuit failure
Luminaire failure
Ready
Deep discharge protection
ISO-Failure
Other failures
Function test
Duration test
Safety Source
Inverted
Use as buzzer
LED Service Pin
Ready for operation (green LED):
Safety power source (yellow LED):
Faults (red LED):
Scenario active (orange LED):
Service Pin:
56
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
Relay 1 Relay 2
X
X
X
X
X
X
X
X
X
X
X
X
Description
The device works without problems.
The emergency lighting and all internal and external modules are powered by the
battery.
The device function is disturbed.
An evacuation was triggered via the AE-CU controller.
To login and logout the ACU module.
Relay 3 Relay 4
X
X
Transistor Transistor
output 1 output 2