Eaton LoadStar-S JSB Mounting And Operating Instruction page 29

16.1. Table Usergroup
The division of the functions into user groups serves on
the one hand to ensure system integrity by avoiding acci-
dental misconfigurations and on the other hand to simplify
operation.
User
Operator
(All status and service
information, data up and
download via USB)
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
Icons
16.1. Table Usergroup
Legitimacy
• Charging-/Battery Status
o Voltage in V, charge-discharge current in A,
capacity in %, ambient temperature battery
set in°C
o Last DT time
o Status Battery Block Monitoring (optional)
o Status Charging modules (CM)
o Software status
o String current (optional)
o Reset deep discharge
o Reset ISO-failure
• Circuit Status
• Luminaire Status
• IO/3PM-IP Status
• ACU Status
o Communication Status
o Relay Status
o Status Inputs
• PSU Status
• Group device state
o Total pup
o search devices
• Menu
o Get service information.
o Load and save device configuration via
USB
- Copy Config to USB
- Copy Config from USB
- Eject USB
- Select Firmware
- Copy Lum types from USB
• Start FT
29