Eaton LoadStar-S JSB Mounting And Operating Instruction page 62

23 BCM.1 Module
LED`s / Service Push-button
Service Pin:
ISO-Test + / ISO-Test - button:
LED charging fault :
LED ISO Failure:
HMI
ACU
62
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
Function
Pressed shortly
= Login BCM.1 module to ACU
= Status display on the color touch screen.
More than 8 s pressed
= Setting of the float charge voltage
Simulation of an insulation fault
The LED charging fault lights up red when a module of the
charging system (BCM, CM 1.7A or CM3,4 A) is faulty. A de-
tailed error message is displayed on the colour touch screen.
The ISO fault LED lights up red if there is an insulation fault
in the battery circuit.
BCM.1
Strang 1
Strang 2
Strang 3
Strang 4