Setting - Smartgen HMC6 User Manual

No. Items
Feedback
79. Overload To Ask 4
80. Overload Rated 4
11.5 GB SETTING
No. Item
GB Settings
1 Closing Time
2 Opening Time
Switch Failure
3
Action
Closing Time of
4
Solenoid Valve
Opening Time of
5
Solenoid Valve
Manually Open of
6
Semi Auto Mode
After the close signal is send out, warning alarm will be initiated if the controller does not detect the switch
closing signal within the set delay; After the open signal is send out, warning alarm will be initiated if the
controller does not detect the switch opening signal within the set delay.
HMC6 Power Management Controller User Manual
Parameter Range
(0-2000)kW
(0-2000)kW
Table 23 – GB Parameter Settings
Parameter Range Default
(0-20.0)s 5.0
(0-20.0)s 5.0
(0-5) 0: Lock
(0-20.0)s 5.0
(0-20.0)s 5.0
(0-1) 0
Default
real power of heavy load through the
HMP300 module, and PMS will
reserve the remaining power (rated
power of heavy load - current power
of heavy load) according to this
power.
This
module enabled.
The request active power of busbar
100
overload.
The request active power of busbar
60
overload.
Description
Pulse width of switch on. When it is 0, means
output constantly.
Pulse width of switch off, When it is 0, means
output constantly.
Action when switch closing and opening feedback
is inconsistent with switch state.
Pulse width of switch on. When it is 0, means
output constantly.
Pulse width of switch on. When it is 0, means
output constantly.
0: Disable 1: Enable. When it enabled, in semi-auto
mode, the open switch operation will no longer
intelligently judge if it is allowed to open.
Description
feature requires HMP300
Page 57 of 87