Smartgen HMC6 User Manual page 71

No.
109. HC 1 Allowed
110. HC 2 Allowed
111. HC 3 Allowed
Unbalanced Distribution of
112.
Active Power
Unbalanced Distribution of
113.
Reactive Power
Unbalanced Distribution of
114.
Load
115. Self-check Normal Output
116. Close Input Port Active
117. Manual Mode Input Active
118 Reserved
119 Reserved
120 Reserved
121 SG Solenoid Valve Closing
122 SG Solenoid Valve Opening
123 SG Capacity Insufficient
124 DG Capacity Insufficient
SG & DG Parallel No. Exceeds
125
Limit
Busbar Freq. Change
126
Abnormal
127 Gen. Freq. Change Abnormal
128 Blackout
129 NEL 1 Pre-tripping
130 NEL 2 Pre-tripping
131 NEL 3 Pre-tripping
132 DIN16-1 IN1 Active
133 DIN16-1 IN2 Active
134 DIN16-1 IN3 Active
135 DIN16-1 IN4 Active
136 DIN16-1 IN5 Active
HMC6 Power Management Controller User Manual
Name
When HC requests, and genset power is met, this
outputs; when power is not met, it doesn't output.
Outputs when either active distribution unbalanced
or reactive distribution unbalanced is effective.
Outputs when closing input port is effective.
Outputs when manual mode input port is effective.
SG solenoid valve closes and outputs.
SG solenoid valve opens and outputs.
When the controller operates in SG mode and load
receiving mode, if SG on-load is effective, but SG
outputs when capacity is insufficient to receive the full
load.
When the controller operates in SG mode and load
receiving mode, if DG on-load is effective, but SG
outputs when capacity is insufficient to receive the full
load.
When SG and DG are on-grid at the same time or to
synchronize, the DG switch number exceeds the set
value and outputs.
Output when the bus frequency change rate exceeds
the set value and the delay value.
Generating frequency change rate exceeds the set
value and the delay value.
The controller outputs when it detects that the whole
ship is black out.
When controller detects that NEL condition is active
and outputs while the delay is not due.
Outputs when DIN16-1 module input is active.
Description Remark
Page 71 of 87