Receiving; Option Package Contents - YASKAWA BACnet/IP JOHB-SMP3 Technical Manual

Note:
• For Yaskawa customers in the North or South America regions:
If your product is not listed in
provides a list of option manuals by product, and a direct link to download a PDF of the manual.
Scan QR code or refer to:
http://www.yaskawa.com/optionlookup
3

Receiving

After you receive the option package:
• Make sure that there is no damage to the option and no parts are missing.
The Yaskawa warranty does not include damage from shipping. If there is damage to the option or other parts,
contact the shipping company immediately.
NOTICE Damage to Equipment. Do not use damaged parts to connect the drive and the option. Failure to comply
could damage the drive and option.
• Make sure that the model number on the option nameplate and the model number on the purchase order are the
same. Refer to Figure 4.1
• Contact the distributor where you purchased the option or contact Yaskawa or a Yaskawa representative about
any problems with the option.
◆

Option Package Contents

*2
LED Labels
Quick Installation Procedure
*1 Only two screws are necessary to install the option on HV600 and FP605 drives.
YASKAWA SIEP C730600 0MA BACnet/IP Technical Manual
Table 2.1, refer to the web page below to confirm this manual is correct for your product. The web page
for more information.
Table 3.1 Contents of Package
Option Contents
Option
Ground Wire
Screws (M3)
Z1000U
*3
HV600, FP605
3 Receiving
Quantity
1
1
*1
3
1
1
1
7