The MEMOBUS/Modbus address for the drive parameter being accessed must be entered in hexadecimal.
Clicking "Read" will load and display the current value of the given MEMOBUS/Modbus Address.
Clicking "Set" will save the given value to the given MEMOBUS/Modbus address.
After a "Read" or "Set" command is given, Status will display "Waiting" while the action is being carried out, then
"Read Successful" or "Write Successful" is displayed when finished.
◆
Settings Page (Requires Security Login)
The Settings page sets web page behavior parameters. Access is restricted unless a valid password is entered. The
default password is yaskawa.
■
Security Login
Click "Login" and enter a valid password. The button text will change to "Log out" and the status will change to
"Logged in".
Note:
The default security password is "yaskawa".
This password can be changed in the "Change Password" section of the Settings page.
Entering a valid password allows access to the settings in the Settings page, Email Alerts page, and the Parameter
Access page.
■
Webpage Password
To change the password, enter the new password in the "New Password:" and "Confirm Password:" text boxes.
Click "Save password".
YASKAWA SIEP C730600 0MA BACnet/IP Technical Manual
Figure 8.6 Parameter Access Page View
Figure 8.7 Settings Page View
8 Web Interface
39