Network Page - YASKAWA BACnet/IP JOHB-SMP3 Technical Manual

Ac drive option
Hide thumbs Also See for BACnet/IP JOHB-SMP3:
Table of Contents

Advertisement

8 Web Interface

Network Page

The Network page shows the status of the option network traffic and the status of open I/O connections.
Name
Address Mode
Alignment Errors
Auto-Negotiation
Collisions
Current Connections
Deferred Collisions
Duplex
Excessive Collisions
FCS Errors
Frame Too Large
Gateway Address
In NUcast Packets
In Octets
In Ucast Packets
IP Address
Late Collisions
Link Status
MAC Address
Msg Rx Dropped
Msg Rx Errors
36
Figure 8.3 Network Page View
Table 8.1 Network Monitor Descriptions
Either static IP address or DHCP.
Cumulative number of errors for uneven packets lengths.
If auto-negotiation is enabled, this will show the status of the negotiation.
Cumulative number of collisions (half duplex only) reported by the MAC/PHY (Media Access Control/Physical
Layer).
Current number of open connections.
Cumulative number of deferred collisions.
Display either Full or Half.
Cumulative number of excessive collisions.
Cumulative number of frame check sequence errors.
Cumulative number of frames that exceed the maximum frame size.
The Gateway IP Address that the option will use.
Cumulative number of non-unicast packets received.
Cumulative number of incoming octets.
Cumulative number of unicast packets received.
IP Address of the option.
Cumulative number of late collisions.
Active if the cable is plugged in, or inactive if no cable.
MAC Address of the option.
Cumulative number of messages dropped due to input network buffer being full and unable to hold the new message.
Cumulative number of receive errors reported by the MAC/PHY (Media Access Control/Physical Layer).
Description
YASKAWA SIEP C730600 0MA BACnet/IP Technical Manual

Advertisement

Table of Contents
loading

Table of Contents