Chart Page - YASKAWA BACnet/IP JOHB-SMP3 Technical Manual

Name
Msg Rx OK
Msg Tx Dropped
Msg Tx Errors
Msg Tx OK
Multiple Collisions
Out NUcast Packets
Out Octets
Out Ucast Packets
Single Collisions
Speed
Subnet Mask
Tx Retry
Note:
Cumulative counters are reset when the power supply is cycled.
◆

Chart Page

The Chart page can be used to monitor one signal from a predefined list.
• Frequency Reference
• Output Frequency
• Output Current
• Motor Speed
• Torque Reference
• DC Bus Voltage
• Terminal Analog Input 1
• Terminal Analog Input 2
• Terminal Analog Input 3
YASKAWA SIEP C730600 0MA BACnet/IP Technical Manual
Cumulative number of messages received successfully to JOHB-SMP3.
Cumulative number of messages dropped due to output network buffer being full and unable to hold the new message.
Cumulative number of transmit errors reported by the MAC/PHY (Media Access Control/Physical Layer).
Cumulative number of messages transmit successfully from JOHB-SMP3.
Cumulative number of multiple collisions.
Cumulative number of non-unicast packets sent.
Cumulative number of outgoing octets.
Cumulative number of unicast packets sent.
Cumulative number of single collisions.
Connection speed, either 10 Mbps or 100 Mbps.
Subnet Mask of the option.
Cumulative number of retransmits due to busy medium reported by the MAC/PHY (Media Access Control/Physical
Layer).
Figure 8.4 Chart Page View
Description
8 Web Interface
37