Copy Modes; Aps Mode; Ams Mode; Manual Mode - Kyocera KM-S4850W Operation Manual

CHAPTER 4 BASIC COPYING

3. Copy Modes

This machine provides three copy modes: "APS", "AMS", and
"Manual". The copy mode selected in the initial state can be changed
using "0 Auto select set" of the default setting. (Page 7-5)
(Inch)

(1) APS mode

When an original is set, a paper source of the size specified based on
the original size and the magnification ratio will be automatically
selected. To select the APS mode, press the APS/AMS key to display
"APS".
(Inch)
(Metric)
NOTE
• The bypass cannot be selected automatically.
• To press the Paper Source key to enter the AMS mode when the
APS mode has been set, set the "! AMS mode" of the default
setting to "ON". (Page 7-5)
• If "1 Auto rotation mode [Auto rotation]" of the default setting has
been set to "ON", when the orientation of the original is different from
that of the paper, the image will be automatically rotated
counterclockwise by 90 degrees and copied.
4-4
(Metric)

(2) AMS mode

When an original is set, the magnification ratio will be automatically
set based on the selected paper size. To select the AMS mode, press
the APS/AMS key to display "AMS".
(Inch)
(Metric)
NOTE
• If the bypass is selected, the magnification ratio will be 100%.
• If "1 Auto rotation mode [Auto rotation]" of the default setting has
been set to "OFF", the magnification ratio will be automatically set
based on the width of the original and the width of the selected
paper size.
• If "1 Auto rotation mode [Auto rotation]" of the default setting has
set been to "ON", when the orientation of the original is different
from that of the paper, the image will be automatically rotated
counterclockwise by 90 degrees and copied.

(3) Manual mode

A paper source and a magnification ratio are selected manually for
copying.
(Inch)
(Metric)