Media Type [Paper Working]; Media Type Setting [Paper Material Adjustment]; Roll End Adjustment - Kyocera KM-S4850W Operation Manual

2 Media Type [Paper working]

2 2 2 2
1
To enable registration of paper material for each paper
source, press the M or L key to select "ON".
(Inch)
(Metric)
2
Press the OK key. The machine will return to the machine
default setting screen.
3 3
3

3 Media type setting [Paper material adjustment]

3
NOTE
If "2 Media Type [Paper working]" is set to "OFF", this item cannot be
set.
Press the M or L key to select a paper source.
1
(Inch)
(Metric)
2
Press the OK key.
CHAPTER 7 MANAGEMENT AND SETTING
Press the M or L key to select a paper material.
3
(Inch)
(Metric)
4
Press the OK key.
Press the M or L key to select "Back to machine default".
5
6
Press the OK key. The machine will return to the machine
default setting screen.
4 4

4 Roll end adjustment

4 4
Press the M or L key to select a paper material.
1
(Inch)
(Metric)
2
Press the OK key.
7-11