CHAPTER 7 MANAGEMENT AND SETTING
@
@
@ Method copy start
@
@
Press the M or L key to select the desired copy start
1
method.
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
#
#
# Start late time
#
#
NOTE
• If "@ Method copy start" is set to "Start key", this item cannot be set.
Press the M or L key to select the desired delay time for
1
auto start.
The time can be set to from 0.5 second to 5 seconds.
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
7-20
$
$ Paper cut [Selec.cut. Method]
$
$
$
NOTE
• The sizes displayed depend on the setting of "# Standard size set" of
the machine default setting.
Press the M or L key to select the desired cut size.
1
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.
%
%
% Sync. Cut length
%
%
To display the synchronized cut length, press the M or L key
1
to select "ON".
(Inch)
(Metric)
2
Press the OK key. The machine will return to the copy default
setting screen.