How To Set Paper Roll - Kyocera KM-S4850W Operation Manual

CHAPTER 3 PREPARATIONS

(2) How to Set Paper Roll

Use the same procedure when replacing paper roll.
IMPORTANT
• When replacing paper roll, turn the flanges on both sides to rewind the
paper.
1
Open the front cover until it locks.
2
Grasp the roll unit handles A to release the lock and pull out
the roll unit until it stops.
A
3
Lift up the release levers 1 and adjust flange guides 2 on
both sides to the paper size.
4
Insert a supplied flange into the core of new roll.
3-6
A
2
1
Grasp the flange and turn its lever in the direction indicated
5
by the arrow to align the inside and outside m marks on the
flange. The flange will be secured to the paper roll.
IMPORTANT
• If the lever of the flange is not easily turned, set the supplied flange
handle B and turn the flange handle in the direction indicated by
the arrow to align the inside and outside m marks on the flange.
* Also if the lever of the flange is not easily turned when the flange is
removed, use the flange handle.
B
6
Secure the other flange to the paper roll similarly.
7
Set the paper roll in the roll unit by aligning it with the flange
guides 2.
After setting the paper roll, check that the flange tray is not
moved.
2
8
Grasp both paper roll insertion latches 3 and open the
paper roll insertion cover 4.
3
2
4
3