Group Copy - Kyocera KM-S4850W Operation Manual

8
Press the Start key. Copying of the remaining sets will start.
(Inch)

(2) Group copy

This mode makes multiple copies grouped by original.
1
Press the Sort/Group key twice. The Sort/Group indicator will
light up.
(Inch)
(Metric)
(Metric)
CHAPTER 5 FUNCTIONAL COPYING
2
Make copy settings such as the number of copies.
(Inch)
(Metric)
NOTE
• The number of copies cannot be changed when an original is being
scanned or after an original is scanned.
3
Set the first original. Scanning of the original will start and
copies will be output.
4
When the message "Insert next original" appears, make copy
settings for the next original.
(Inch)
(Metric)
5
Set the next original. Scanning of the original will start.
Repeat steps 4 and 5 for remaining originals.
NOTE
• The maximum number of originals that can be scanned is 60. For the
maximum number in job reserve, see ") Maximum Jobs" of the default
setting on page 7-6.
6
When scanning of originals is complete, press the OK key.
5-13