Editing Functions; Image Shift - Kyocera KM-S4850W Operation Manual

2. Editing Functions

(1) Image shift

Copy images can be shifted on paper to the top, bottom, right or left.
The image shift length is 8" [200 mm] at the maximum and can be
changed in 0.1" [1 mm] increments.
If synchronized cut is selected in 100% copying, the original length
will be equal to the paper length.
Image shift to left
NOTE
• The default value for shift up, shift down, shift to left, and shift to right
can be set respectively by using "⁄ Edit Function defaults [Default of
edit. function]" of the default setting. (Page 7-7)
Image shift up
Image shift down
Image shift to right
CHAPTER 5 FUNCTIONAL COPYING
1
Press the Editing key.
(Inch)
Press the M or L key to select "Shift".
2
(Inch)
(Metric)
3
Press the OK key.
• To shift the image up or down, proceed to the next step.
• To shift the image to the right or left, proceed to step 10.
• To cancel all image shift settings, proceed to step 17.
> Setting of shift up or down
Press the M or L key to select "Up/Down".
4
(Inch)
(Metric)
5
Press the OK key.
(Metric)
5-5