Margin Copy; G Leading Edge Margin; G Trailing Edge Margin; G Whole Sheet Print - Kyocera KM-S4850W Operation Manual

(2) Margin copy

G Leading edge margin

A margin is made or cut at the leading edge (original insertion side) of
the copies. The margin amount is 8" [200 mm] at the maximum in
both cases and can be changed in 0.1" [1 mm] increments.
If the synchronized cut is selected in 100% copying and a leading
margin is added, the paper length will be longer than the original
length by the amount of the margin. If the margin of the leading edge
is cut, the paper length will be shorter than the original length by the
amount of the margin. The minimum paper cut length, however, is 11"
[279 mm].

G Trailing edge margin

A margin is made or cut at the trailing edge (opposite of the original
insertion side) of the copies. The margin amount is 8" [200 mm] at the
maximum in both cases and can be changed in 0.1" [1 mm] incre-
ments.
If the synchronized cut is selected in 100% copying and a trailing
margin is added, the paper length will be longer than the original
length by the amount of the margin. If the margin of the trailing edge
is cut, the paper length will be shorter than the original length by the
amount of the margin. The minimum paper cut length, however, is 11"
[279 mm].

G Whole sheet print

If images cover the overall area of the original, part of copy images
may be lost. If whole sheet print is specified, a margin of 0.4" [10 mm]
is added to the leading and trailing edges respectively on the copy
and the whole image will be copied without image loss.
Whole sheet print
NOTE
• The default margin amount of the leading and trailing edges can be set
respectively by using "⁄ Edit Function defaults [Default of edit.
function]" of the default setting. (Page 7-7)
Leading edge
margin (+)
Leading edge
margin (-)
Trailing edge
margin (+)
Trailing edge
margin (-)
CHAPTER 5 FUNCTIONAL COPYING
1
Press the Editing key.
(Inch)
Press the M or L key to select "Edge adj".
2
(Inch)
(Metric)
3
Press the OK key.
• To make a margin at the leading edge, proceed to the next
step.
• To make a margin at the trailing edge, proceed to step 10.
• To execute whole sheet print, proceed to step 17.
• To cancel all margin copy settings, proceed to step 21.
(Metric)
5-7