Reduce Length Ldt - Kyocera KM-S4850W Operation Manual

6 Press the M or L key to select "+" or "-" and use the numeric
keys to enter the margin amount.
Set the margin amount to from -8.0" to +8.0" [-200 mm to
+200 mm].
Proceed to step 8.
(Inch)
(Metric)
7
Use the numeric keys to enter the border erase amount.
Set the border erase amount to from 0" to +8.0" [0 mm to
+200 mm].
Proceed to step 8.
(Inch)
(Metric)
8
Press the OK key.
Press the M or L key to select "Back to copy default".
9
10
Press the OK key. The machine will return to the copy default
setting screen.
CHAPTER 7 MANAGEMENT AND SETTING
¤ ¤ ¤ Adj. preview copy ¤ ¤
Press the M or L key to select the desired preview copy
1
type.
(Inch)
(Metric)
Press the OK key. The machine will return to the copy default
2
setting screen.
‹ ‹

‹ Reduce length Ldt.

‹ ‹
1 Refer to steps 1 - 6 of "(2) Setting method for manager"
on page 7-9 and indicate the copy default setting screen.
Press the M or L key to select "Reduce length Ldt." and
2
press the OK key.
3
Use the numeric keys to input the length of the original.
(Inch version)
(Metric version)
Press the OK key. The machine will return to the copy
4
default setting screen.
To complete the setting, press the M or L key to select
5
"Back to Default/mgr" ["Back to Default/manager"] and
press the OK key. Press the M or L key to select "End".
7-23