Kyocera KM-S4850W Operation Manual page 74

CHAPTER 7 MANAGEMENT AND SETTING
4
Press the OK key.
Press the M or L key to select "Back to machine default".
5
6
Press the OK key. The machine will return to the machine
default setting screen.
0 0 0 Copy size adjustment 0 0
Press the M or L key to select a paper material.
1
(Inch)
(Metric)
2
Press the OK key.
3 Press the O or P key to select the copy size in the length-
wise direction (X).
The value can be set to from -3.0% to + 3.0%.
4 Press the M or L key.
Press the M or L key to select the copy size in the widthwise
5
direction (Y).
The value can be set to from -3.0% to + 3.0%.
6
Press the OK key.
Press the M or L key to select "Back to machine default".
7
8
Press the OK key. The machine will return to the machine
default setting screen.
7-14
! ! Fusing temperature [Set fixing temp.] ! ! !
Press the M or L key to select a paper material.
1
(Inch)
(Metric)
2
Press the OK key.
Press the M or L key to select the fixing temperature for
3
each paper material.
> If "Plain" has been selected, select from 145˚C, 155˚C, and
165˚C.
(Inch)
(Metric)
> If "Vellum" has been selected, select from 165˚C, 175˚C,
and 185˚C.
> If "Film" has been selected, select from 150˚C, 160˚C, and
170˚C.
> If "Custom" has been selected, the temperature that has
been set for custom paper material will be displayed.
4
Press the OK key.