Chapter 2 Names Of Parts; Main Body - Kyocera KM-S4850W Operation Manual

CHAPTER 2 NAMES OF PARTS

6

(1) Main body

1 Original guide
2 Original cover
3 Original leading edge cover
Open to set an original with precision.
4 Original loop guide
5 Operation panel
6 Original table
7 Original holders
A long rolled original can be set.
8 Contact glass (Originals are scanned here.)
9 NetWork interface connector (is located on the left side of your
printer)
Use to connect your printer to the LAN (Local Area Network) with a
10 BASE-T or 100 BASE-TX cable
IMPORTANT
Once you turn the main switch in your printer ON ( | ) wait for at least
20 seconds or so before attempting to turn it OFF (
there is a danger of damaging the Network Card.
7
8
) again as
9
2-1