Acceptable/Unacceptable Paper - Kyocera KM-S4850W Operation Manual

CHAPTER 10 OPERATING A PRINTER WITH THE KM-S4850w INSTALLED

(2) Acceptable/Unacceptable Paper

The following information pertains to what type of paper can and can
not be printed onto with the printer.
G Acceptable paper
In Drawer 1 (optional), Drawer 2 and Drawer 3...
• Paper roll width: between 8 1/2" and 36"
• Paper roll diameter: less than 6 3/4"
• Paper roll tube diameter: 3"
8 1/2" - 36"
64 g/m 2 - 80 g/m
• Paper roll types:
Standard paper (between 64 g/m
Vellum
Film
In the manual feed table...
• Paper sizes: between 8 1/2" x 11" and 36" x 48"
• Paper width: between 8 1/2" and 36"
• Paper length: between 11" and 48"
8 1/2" - 36"
2
64 g/m
• Paper types:
Standard paper (between 64 g/m
Vellum
Film
10-2
2
2 2
and 80 g/m )
2
- 80 g/m
2 and 80 g/m 2 )
G Unacceptable paper
• Any paper other than that indicated under "G Acceptable paper" at
left.
• Paper that is stapled, etc.
• When using paper rolls that are wrinkled, folded or torn, unroll the
paper until there are no more such defects and cut off the portion
with the wrinkles, folds and/or tears before use.