CHAPTER 5 FUNCTIONAL COPYING
3. Sort/Group copy
(1) Sort copy
This mode makes collated sets of copies from multiple originals.
1
Press the Sort/Group key. The Sort/Group indicator will light
up.
(Inch)
2
Make copy settings such as the number of copies.
(Inch)
(Metric)
3
Set the first original. Scanning of the original will start and
one copy of the original will be output.
5-12
(Metric)
4
When the message "Insert next original" appears, make copy
settings for the next original.
(Inch)
(Metric)
5
Set the next original. Scanning of the original will start. Only
one copy of the scanned original will be output
Repeat steps 4 and 5 for remaining originals.
NOTE
• The maximum number of originals that can be scanned is 60. For the
maximum number in job reserve, see ") Maximum Jobs" of the default
setting on page 7-6.
6
When scanning of originals is complete, press the OK key.
7
To change the number of copies, enter the number using the
numeric keys.
(Inch)
(Metric)