Chapter 3 Preparations; Originals At Copying; Type Of Originals - Kyocera KM-S4850W Operation Manual

CHAPTER 3 PREPARATIONS

1. Originals at copying

(1) Type of originals

Note the following restrictions on the originals that can be used in this
machine.
G Acceptable originals
• Only sheet type originals can be used.
• Original sizes in standard sizes are 8 1/2" x 11" to 36" x 48" [A4
portrait to A0]
• Original thickness is 64 to 80 g/m
• Original length is 11" to 237" [279 to 6000 mm].
• Original width is 8 1/2" to 36" [210 to 920 mm].
NOTE
• Number of originals that can be scanned for sort copying (for
reference)
Memory compression setting Number of originals that can be scanned (36" x 48" [A0])
High-compression Approx. 8 sheets
Standard-compression Approx. 2 sheets
The number of originals above is a value for reference in case of
standard memory capacity (128 MB). The value varies with the
original feed conditions and the type of originals.
• The compression ratio of image data in memory can be changed by
using "( Memory compress" of the default setting. If "Low-
compression" is selected, addition of memory is needed.
2 .
G Carrier sheet (option)
Use the carrier sheet when copying from the following types of
originals. It is also recommended for use with any other delicate or
important originals or when making multiple copies from the same
originals. For explanation on how to use the carrier sheet, see "(5)
Carrier Sheet (option)". (Page 3-3)
• Thin, flimsy or fragile originals
• Carbon paper
• Originals with severe wrinkles or folds
• Originals with punch holes or perforations
• Originals with other paper, etc., pasted on it
• Piled originals
NOTE
• When copying a film type original repeatedly, be sure to use the
carrier sheet to prevent soil due to static electricity.
• When copying an original on which text has been written in pencil, it is
recommended to use the carrier sheet to prevent soil of the original.
3-1