Names Of Parts; Operation Panel - Kyocera KM-S4850W Operation Manual

CHAPTER 8 PRIOR TO SET-UP (SCANNER AND PRINTER)
1. Name of Parts (for Printer and Scanner mode)
(1) Operation panel (for Printer and scanner mode)
1
APS/AMS 100% Preset R/E
4
Image Type
Light Dark
5
Lighter Darker
6
8
7 Copier/
Printer/
1
Scanner
Printer
Data/On-line
4
9
&
Roll Cut
7
^
Scan
.
Stop
1 Message Display
Machine status and errors are indicated on the message display.
2 Original Image Type key
When scanning documents, press this key when you want to
select between the 2 available document types: "Normal" or
"Text/Line".
Image processing that is appropriate to the documents being
scanned will be carried out.
(When the Panel Operation mode is turned ON.)
3 Auto Exp. key
When scanning documents, press this key when you want to have
the scanning exposure set automatically.
(When the Panel Operation mode is turned ON.)
4 Light/Dark exposure indicators
• When the Light exposure indicator is lit: The exposure is set to a
lighter level than the standard setting.
• When the Dark exposure indicator is lit: The exposure is set to a
darker degree than the standard setting.
(When the Panel Operation mode is turned ON.)
5 Scanning exposure scale
The lit indicator shows the currently selected exposure for
scanning. When you want to lighten the exposure, move the lit
indicator to the left and when you want to darken the exposure,
move the lit indicator to the right.
(When the Panel Operation mode is turned ON.)
6 Scanning exposure adjustment keys (O) (P)
When scanning documents, use these keys when you want to
adjust the scanning exposure.
(When the Panel Operation mode is turned ON.)
8-2
2 3 * (
Language
Editing
Output
Program
Paper Cut
Media
Source Size Recall
(Width) (Length)
Original
Auto Exp.
Repeat
Add Job
2 3
Copy
Sort/
Interrupt
5 6
Group
Preview Energy
8 9
Saver
Copy
0 Reset
Stop/
Clear
Start
7 Copier/Printer/Scanner key
Press this key when you want to switch between the Copier
mode, the Printer mode and the Scanner mode, and when you
want to switch the printer on- and off-line. Once "On line ...
Key" or "Off line ...
0
the Enter key in order to complete the procedure.
8 Printer Data / On-line indicator
Adj.
This indicator is lit to indicate when the printer is on-line and goes
out when it is off-line.
9 Numeric keys
!
Use the numeric keys when you want to enter a desired value for
@
one of the various settings.
0 * / Language key
Press this key during setting of the printer's IP address as well as
when you want to make a test print.
! NMO P cursor keys
Use these cursor keys in order to select the various setting
modes.
#
@ Enter key
$
Press this key when you want to register a setting.
%
# Start key
When the default setting for the "Method of copy start" in the
scanner operation panel is set to "Start key", press this key when
you want to initiate scanning.
$ Reset key
Press this key when you want to cancel settings and return to the
initial mode.
% Stop/Clear key
Press this key when you want to stop printing or clear entered
values when performing various settings.
^ Roll Cut key
Press this key when a new paper roll is set. Also press to cut
paper roll by force during output and to cancel printing.
& Scan stop key
Press this key to stop immediately transfer of originals.
^ Paper Source (Width) key
Press this key when you want to designate the image
transmission size.
& Cut Size (Length) key
Press this key when you want to designate the image
transmission size.
Key", as appropriate, is displayed, press