CHAPTER 10 OPERATING A PRINTER WITH THE KM-
1. Sending Print Commands
(1) Procedure
Perform this procedure in order to send print commands from your
computer and print using a printer with the KM-S4850w installed.
1
Turn the main switch to the printer ON ( | ).
Warm-up will begin and "Ready to copy." in the scanner
display will be displayed once warm-up is complete.
2
Make sure that the Printer Data / On-line indicator is lit.
Copier/
Printer/
Scanner
Printer
Data/On-line
3
Perform the appropriate printing procedure in your
computer.
S4850w INSTALLED
1
2
3
4
5
6
7
8
9
.
0
NOTES
• Refer to the Functions Edition (On-Line Manual) for more detailed
information on printing from your computer.
• Even if you perform the appropriate printing procedure in your
computer, there are cases when printing will not be accomplished
immediately, such as if a copying operation has just been
completed at the Printer or during Interrupt copying.
4
If you want to feed paper manually, set the paper to be
printed onto on the manual feed table.
10-1