Maintaining Transceivers And Fiber Optic Cables On Qfx5200 - Juniper QFX5200 Hardware Manual

NOTE: Each power supply must be connected to a dedicated power source outlet.
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.
RELATED DOCUMENTATION
QFX5200 Power System | 39
Connecting the QFX5200 to Power | 109
QFX5200 Field-Replaceable Units | 8
Maintaining Transceivers and Fiber Optic Cables on
QFX5200
IN THIS SECTION
QFX5200-32C-L Time Allowance | 136
Remove a Transceiver | 136
Install a Transceiver | 138
Disconnect a Fiber-Optic Cable | 141
Connect a Fiber-Optic Cable | 142
How to Handle Fiber-Optic Cables | 143
https:/ /www.juniper.net/customers/support/tools/updateinstallbase/
135
.