Packing A Qfx5200 Device Or Component For Shipping; Packing A Qfx5200 Switch For Shipping - Juniper QFX5200 Hardware Manual

CAUTION: Do not stack any of the hardware components.

Packing a QFX5200 Device or Component for Shipping

IN THIS SECTION

Packing a QFX5200 Switch for Shipping | 165

Packing QFX5200 Components for Shipping | 166
If you are returning a QFX5200 or component to Juniper Networks for repair or replacement, pack the
item as described in this topic.
Before you pack a QFX5200 or component:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
damage. See "Prevention of Electrostatic Discharge Damage" on page
• Retrieve the original shipping carton and packing materials. Contact your JTAC representative if you
do not have these materials, to learn about approved packing materials. See
Support to Obtain a Return Materials Authorization for a QFX Series Device or Component
Ensure that you have the following parts and tools available:
• ESD grounding strap.
• Antistatic bag, one for each component.
• If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your
rack or cabinet.
This topic describes:
Packing a QFX5200 Switch for Shipping
To pack a QFX5200 for shipping:
1. Power down the switch and remove the power cables. See
144.
194.
Contacting Customer
"Powering Off a QFX5200" on page
165
.