Item Or Task - Juniper QFX5200 Hardware Manual

• QFX5100-48S
• QFX5100-48T
• QFX5100-96S
Valid Configurations for a QFX5200 Virtual Chassis
You can create an all QFX5200-32C Virtual Chassis with up to three members. Use the QFX5200-32C
in all three member roles: primary RE, backup RE, and line card. Configure the Virtual Chassis Ports
(VCPs) as 40-Gigabit Ethernet only. QFX5200-48Y is not supported in a QFX5200 Virtual Chassis.
VC Deployment Checklist
Use Table 26 on page 61
Table 26: Deployment Checklist

Item or Task

Components
Determine the number of
devices in the Virtual Chassis
and the role of each device
(primary RE, backup RE, or
linecard).
NOTE: A Virtual Chassis is not
constrained to a single building;
the limits for the optic cable are
the only consideration.
Environment
Evaluate the provisioning
options and determine the
configuration method that
applies to your deployment.
to plan your deployment:
For More Information
Understanding QFX Series Virtual
Chassis
Understanding Virtual Chassis
Components
Configuring an EX4650 or a QFX Series
Virtual Chassis
Performed By Date
61