Juniper QFX5200 Hardware Manual page 163

Table 43: Chassis Alarm Messages for QFX5200-32C and QFX5200-48Y
Component Alarm Type
Major (red)
Minor (yellow)
Management Major (red)
Ethernet
interface
CLI Message
RE number /var partition is full
RE
Rescue configuration is not set
Feature usage requires a license
or
feature expired
License for
Management Ethernet 1 Link Down
(Continued)
Recommended Action
Clean up the system file storage
space on the switch. For more
Cleaning Up the
information, see
System File Storage Space .
request system
Use the
configuration rescue save
command
to set the rescue configuration. For
Setting or
more information, see
Deleting the Rescue Configuration .
Install the required license for the
feature specified in the alarm. For
Software
more information, see
Features That Require Licenses on
the QFX Series .
Check whether a cable is connected
to the management Ethernet
interface, or whether the cable is
defective. Replace the cable, if
required.
On models that have both em0 and
em1 management interfaces
available, you must connect both
interfaces. If both interfaces are not
connected, the alarm is raised.
However, the alarm has no service
impact.
If you are unable to resolve the
problem, open a support case by
using the Case Manager link at
https:/ /www.juniper.net/support/
call 1-888-314-5822 (tollfree, US or
1-408-745-9500 (from outside the
United States).
154
or