Maintaining Transceivers And Fiber Optic Cables On A Qfx5130-32Cd; Remove A Transceiver - Juniper QFX5130-32CD Hardware Manual

RELATED DOCUMENTATION
QFX5130-32CD Power System | 25
Connecting the QFX5130-32CD to Power | 85
Maintaining Transceivers and Fiber Optic Cables on
a QFX5130-32CD
IN THIS SECTION

Remove a Transceiver | 105

Install a Transceiver | 108
Disconnect a Fiber-Optic Cable | 111
Connect a Fiber-Optic Cable | 111
How to Handle Fiber-Optic Cables | 112
Remove a Transceiver
Before you remove a transceiver from a device, ensure that you have taken the necessary precautions
for the safe handling of lasers (see
Ensure that you have the following parts and tools available:
• An antistatic bag or an antistatic mat
• Rubber safety caps to cover the transceiver and fiber-optic cable connector
• A dust cover to cover the port or a replacement transceiver
The transceivers for Juniper Networks devices are hot-removable and hot-insertable field-replaceable
units (FRUs). You can remove and replace the transceivers without powering off the device or disrupting
device functions.
Laser and LED Safety Guidelines and Warnings
).
105