Maintaining Transceivers And Fiber-Optic Cables On Qfx10002; Remove A Transceiver - Juniper QFX10002 Hardware Manual

Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.
RELATED DOCUMENTATION
QFX10002 Power System | 50
Connecting the QFX10002 | 105
QFX10002 Field-Replaceable Units | 11
Maintaining Transceivers and Fiber-Optic Cables on
QFX10002
IN THIS SECTION

Remove a Transceiver | 130

Install a Transceiver | 133
Disconnect a Fiber-Optic Cable | 136
Connect a Fiber-Optic Cable | 137
How to Handle Fiber-Optic Cables | 137
Remove a Transceiver
Before you remove a transceiver from a device, ensure that you have taken the necessary precautions
for the safe handling of lasers (see
Ensure that you have the following parts and tools available:
• An antistatic bag or an antistatic mat
• Rubber safety caps to cover the transceiver and fiber-optic cable connector
Laser and LED Safety Guidelines and Warnings ).
130