Qfx5200 Power Cord Specifications - Juniper QFX5200 Hardware Manual

Table 18: AC Power Specifications for a QFX5200
Item

QFX5200 Power Cord Specifications

Detachable AC power cords are shipped with the chassis, if you include them as part of your order. The
coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320.
The plug end of the power cord fits into the power source outlet that is standard for your geographical
location.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords that can be ordered for
the QFX Series switches are in compliance.
Table 19 on page 43 lists AC power cord specifications provided for each country or region.
Table 19: AC Power Cord Specifications
Country/ Electrical
Region Specifications
Australia 250 VAC, 10 A, 50
Hz
Brazil 250 VAC, 10 A,
50 Hz
(Continued)
Specification
QFX5200-48Y
Plug Standards
AS/NZ 3109-1996
NBR 14136 Type
BR/3
430 W
Shipped Spare Juniper
Juniper Model Number
Model
Number
CG_CBL- CBL-EX-PWR-
C13-06-AU C13-AU
CBL-PWR-
C15M-
HITEMP-BR
43
Graphic