ProSoft Technology ILX69-PBM User Manual page 41

ILX69-PBM ♦ CompactLogix™ or MicroLogix™ Platform
PROFIBUS Master Communication Module
Editing the Slave Address
Assigning and editing a slave address is done in the ILX69-PBM configuration window.
1 Double-click on the ILX69_PBM icon in the Network pane.
This opens the netDevice – Configuration ILX69_PBM<x> window.
2
3 In the C
ONFIGURATION
Station Address parameter.
4 When complete, click A
5 Save the project.
ProSoft Technology, Inc.
selection, edit the slave's address under the
> S T
TATION ABLE
, then OK.
PPLY
Configuration and Start-Up
User Manual
Page 41 of 113