Installation; Package Contents - Motorola APEX1000 Installation And Operation Manual

3
Step-by-Step Instructions
The following topics cover the basic steps required to install the APEX1000:
•
Mounting the APEX1000
•
Connecting the Interface Cables
•
Applying Power to the Unit
•
Confirming APEX1000 Power-on Sequencing
To make the procedure as quick and easy as possible, take a few minutes to review the
installation information, gather any special tools, procure any
shipment, and complete the tasks listed below before you begin the installation.

Package Contents

Confirm that you have received the following items with the APEX1000 shipment:
Item
APEX1000 unit
Mounting screws, 10-32, 0.5 inches
long, Phillips, round, with plastic
washer
Rear mounting brackets
Mounting screws, 10-32, 0.5 inches
long, Phillips
As applicable:
AC cord, 3 conductor, 7 feet 6
inches, 18AWG
or
DC cord, 3 conductor, 15 feet
Installation • Package Contents
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Quantity Description
1 The APEX1000 device configured with
hardware as ordered
4 Provided to mount front of unit in the
rack
2 Provided to support rear of unit in the
rack
4 Provided to mount rear brackets to the
rack
1 or 2 Power cord(s) for unit
(depending on
ordering criteria)

Installation

items not supplied with
B
29