Installation - Motorola RLN5929 Manual

DESCRIPTION
In case of emergency situations, the user of a mobile
radio may need to secretly communicate to the base
station. The RLN5929 Emergency Foot Switch
provides the means to quickly and secretly trigger the
radio to send an emergency alert.

INSTALLATION

Carefully select the installation location for the
RLN5929 Emergency Foot Switch. Plan the location
so that once installed, the foot switch is readily
accessible to the user, but will not be stepped on
accidentally while performing normal vehicle
operation. Refer to Figure 1 for foot switch detail and
parts identification.
Preparing the Foot Switch
The foot switch is assembled with two hex nuts and a
rubber cap. Disassemble the foot switch as follows:
1. Unscrew the rubber cap in a counterclockwise
direction until it is loose on the threaded shaft.
2. Pull the rubber cap away from the threaded shaft
and off the switch actuator shaft.
3. Remove one hex nut from the threaded shaft.
2