Table of Contents
Advertisement
APEX1000 minimum and recommended hardware specifications
Item
PC Processor
RAM
Disk free space
Display resolution
(minimum)
*The maximum size of an EM screen is 1024 x 768.
Operating System
The APEX-EM runs under Java Virtual Machine (JVM).
Initiating an EM Session
The EM provides a user interface to the APEX1000 for configuration and status
monitoring, and communicates with the APEX1000 through SNMP. This procedure
allows you to configure and gather status from the APEX1000 under the following
conditions:
•
Data is read from the APEX1000 using SNMP get and getnext functions, and sent to
the APEX1000 using SNMP set functions.
•
When configuration data is set on the APEX1000 using the Element Manager, it is
read back by the EM so that the EM window stays synchronized with the APEX1000
database.
Typically, the OAM&P network is used to communicate with the APEX1000 through the
APEX1000 EM. However, the Data IP network may also be used (after it is properly
configured).
To initiate a session using the APEX1000 EM:
1. Open an Internet web browser and enter the APEX1000 IP address in the URL
address field.
Setup and Operation • Initiating an EM Session
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Minimum Specification
Pentium 4 2.0 GHz
1 GB RAM
50 MB
800 x 600
Recommended Specification
Pentium 4 2.8 GHz
1.5 GB RAM
50 MB
1024 x 768*
B
42
Advertisement
Table of Contents
