Qrm Download Window - Motorola APEX1000 Installation And Operation Manual

Note: As illustrated below, allowing the cursor to temporarily hover over any channel box
displays the information for that particular QAM:
Button
QAM Versions
QRM Download
APEX RF Port Failure
APEX Backup Port

QRM Download Window

Use this window to initiate and monitor the progress of manual QRM downloads.
QRM FW downloads will automatically occur at bootup, but only if the QRM has an
older version of FW or FPGA.
1. To monitor the progress of a download, click Download.
The QRM Download window displays, to show progress of any downloads.
CAUTION The download of a single QAM module (two QRMs) takes approximately five (5)
minutes. During a download, the QAM channels are inactive and cannot be used.
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
QAM Status window button definitions
Definition
Displays the QAM Versions
Displays the QRM Download Progress
Indicates that the RF Port has failed over to backup (The value of 0 indicates no
failover).
Values: None (0), 1, 2, 3, 4, 5
Shows the current state of APEX RF Port #6.
Values are:
•
Disabled
•
Standby
•
Active
•
Failed
•
Removed
window.
window.
B
228