Motorola APEX1000 Installation And Operation Manual page 286

Item
TS:QAM
Host IP Packet Status
Maximum Insertion
Rate (Kbps)
Packets Inserted Per
Second
Insertion Rate (Kbps)
Total Number Packets
Inserted
Packets Discarded Per
Second
Discarded Rate (Kbps) Discarded rates of the MPEG interface output ports during the last monitoring
Total Number Packets
Discarded
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Host IP Packet Statistics screen field definitions
Definition
The Output Transport Stream number and Output QAM channel.
Summary of the possible alarms associated with an output stream, such as:
•
Output Utilization Threshold
•
Output Overflow
The highest current fault is indicated by each LED. The alarm indications are as
follows:
•
Green – no alarm
•
Gray – cause of alarm is indeterminate
•
Yellow – warning
•
Blue – minor
•
Magenta – major
•
Red – critical
If an LED alarm indication is active, display the
which of the above Output Transport Stream alarms is causing the event.
User-configured maximum insertion rate for an output stream. This determines
the maximum amount of Enet 1 or 2 data that will be inserted into an output
stream every second. This is used to throttle the ENET1 or ENET2 input
streams.
The maximum is 2500Kbps per output stream with a total of 10Mbps across all
48 QAM output streams.
Average number of packets inserted per second during the last monitoring
period (five-second monitoring period).
Insertion rates of the MPEG interface output ports during the last monitoring
period.
Total number of packets inserted by the MPEG interface output ports.
Average number of packets discarded per second during the last monitoring
period (five-second monitoring period).
period.
Total number of packets discarded by the MPEG interface output ports.
B
Alarms window to determine
268