Table of Contents
Advertisement
Editing Values
To change any of the editable text-entry field settings:
1. Highlight the desired text to be replaced.
2. Type the new entry into the field.
3. Click Apply to implement your modifications.
CTE Mode Settings
CTE is typically used for legacy VOD in UDP Port Mapping mode, or session-controlled
mode.
To begin configuring algorithm encryption settings:
1. Select Configuration> Encryption Configuration.
2. Select the CTE tab.
The CTE screen displays:
Note: To use Full Encryption mode in CTE, you must configure the RDS tab with the IP
address and port of the EMM server (DAC 6000 RDS interface).
Configuration • Encryption Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
124
Advertisement
Table of Contents
