Motorola APEX1000 Installation And Operation Manual page 307

Condition
Loss of Physical Loss of physical input on a
Input
GigE interface
•
Buffer Full
•
•
Low Bitrate Input stream is below the
user-defined bit rate
High Bitrate Input stream is above below
user-defined bit rate
Primary Stream Primary input stream is
Threshold
below user-defined threshold
as compared to secondary
TS Redundancy
Input stream has failed over
Failover
from primary to secondary
input stream
Redundant
Primary GigE interface has
Interface Failover
lost link. APEX will failover to
backup GigE interface, which
will assume the same IP
address as the primary
GigE to Host Host processor has lost
Communication
communication with the
alarm
GigE processor
Service Error One or more services is in
error. Indicates mapped
service is waiting for
extraction (PAT or PMT), or is
unable to process input PAT
or PMT and cannot output
program as mapped
Appendix B • Alarms Window Field Definitions
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Description
Buffer fullness threshold
exceeded or full
Major indicates threshold
exceeded
Critical indicates buffer is
full
Data Included in
Event or Alarm Alarm or Event
(Severity Level)
GigE Alarms
Alarm GigE Interface
•
Major
Alarms GigE Processor #
(0, 1)
•
Major
•
Critical
Alarm None
•
Major
Alarm None
•
Major
Alarm None
•
Major
Alarm None
•
Major
Alarm GigE Interface #
•
Major
Alarm GigE Interface #
•
Major
Output Alarms
None
Alarm
•
Major
B
Trap Notes
1. Can be disabled
2. Trap sent per instance
1. Can be disabled
2. Trap sent on a GigE
Processor basis
1. Can be disabled
2. Overall alarm – one
alarm for all input streams
1. Can be disabled
2. Overall alarm – one
alarm for all input streams
1. Can be disabled
2. Overall alarm – one
alarm for all input streams
1. Can be disabled
2. Overall alarm – one
alarm for all input streams
1. Can be disabled
2. Overall alarm – one
alarm for all input streams
289