Rtsp Status; Figure 8-8 - Rtsp Status - Motorola APEX1000 Installation And Operation Manual

Item
TS:QAM
Group Name
QAM Channel Name
Bandwidth Delta (kbps)

RTSP Status

This window shows the status of all RTSP connections on the APEX1000, as well as a
map of the (up to) 768 input multicast streams coming in on GigE and going out to QAM
RF:
Note: 32 rows display at one time. Use the Display Range setting to select the rows to
display.
SDV — Switched Digital Video Controls • RTSP Controller Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
RTSP QAM Configuration window field definitions
Definition
This field shows the Output Transport Stream # and QAM #.
Information that is reported to the ERM and useful for the operator to group
QAMs together.
This is automatically filled from the Streaming Zone and PAT TS ID.
The QAM Channel Name must be in the following format:
Streaming Zone.TSID
The APEX1000 issues an update to the controller when its available bandwidth
changes by a value exceeding this amount.
The default value is 1000.
Figure 8-8 — RTSP Status
B
167