Source Id And Provider Id - Motorola APEX1000 Installation And Operation Manual

Source ID and Provider ID

For Broadcast encrypted services, the APEX retrieves the RMD information for the
service from the RDS and uses this information to encrypt the service. The service is
only remultiplexed after the APEX has received the RMD information identified by the
Source ID and Provider ID. The service is encrypted using the RMD information received
from the RDS; as a result, you must configure the RDS IP address when mapping any
services in Broadcast Encrypted mode.
To select a Source ID and Provider ID from the Service List menu:
1. Right-click on any row in the Program Mapping window.
2. Select Lookup Source & Provider.
The Service List window displays:
3. Scroll through the Service List to highlight the desired entries.
4. Click Insert.
5. Click Close to exit.
Manual Routing • Program Mapping
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
138