Table of Contents
Advertisement
Configuring QAM Outputs
You must also use the RTSP QAM Configuration window to configure the APEX1000
QAM outputs:
1. Select SDV > RTSP QAM Config
or
2. Click the Edge Configuration button on the RTSP Controller Configuration window,
and then select RTSP QAM Configuration:
The RTSP QAM Configuration window displays:
Configuring for Switched Digital Video • Step by Step Instructions
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
182
Advertisement
Table of Contents
