Table of Contents
Advertisement
Ordering Information
When ordered by itself, the APEX1000 chassis includes two RFPM fan filler modules and
one power supply fan filler module. Because unit operation requires at least one RFPM
module and one power supply module, it is not necessary to provide three RFPM fan
filler modules or two power supply fan filler modules.
Identifying the QAM Modules
The back panel of the APEX1000 provides access to the three replaceable QAM modules
with two RF connectors each, as shown in the figure below. When viewed from the
back of the unit, #1 is the left QAM module, #2 is located in the middle, and #3 is located
on the right:
Installing a QAM Module
See
RFPM and Power Supply Modules
QAM or power supply module.
QAM Conversion Procedure
This section provides instructions for field converting an APEX1000 QAM module from a
standard density 2x4 module to a high density 2x8 module.
To begin the QAM module upgrade process:
1. A P.O. to Motorola for part number 540400-001-00 must be issued. The QAM
module conversions are performed on a per QAM module basis, so the quantity on
the P.O. should be equal to the number of modules that are to be converted to 2x8.
Note: A Purchase Order must be issued to Motorola for each QAM module conversion.
One P.O. can cover multiple conversions. The P.O. must include the QAM conversion
part number, the number of conversions requested (one per QAM module), and the unit
price per conversion as shown below:
Item
QAM Conversion Part Number
QAM Conversion Price (per conversion)
2. After Motorola processes the P.O., you will receive an e-mail from Motorola
providing instructions and a link to a Motorola website where the conversion keys
can be requested and received.
Configuration • QAM Module Upgrade
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
for more details on removing and installing a
Description
540400-001-00
Check with your sales representative
B
105
Advertisement
Table of Contents
