Motorola APEX1000 Installation And Operation Manual page 111

Parameter
Enable
Primary Server IP
Primary UDP Port
Primary Shared Secret
Secondary Server IP
Secondary UDP Port
Secondary Shared Secret
Server Timeout
Maximum Retries
Local Failback
NAS IP Interface
Configuration • RADIUS Authentication
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
RADIUS Configuration window field definitions
Description
Place a checkmark in this box to enable RADIUS log in.
Range: Enabled/Disabled
The default is Disabled.
IP address of the primary RADIUS server.
Range: Unicast IPv4 address
The default is 0.0.0.0.
Authentication/Authorization port for primary server.
Range: 1 – 65535
The default is 1812.
Displays the shared secret for the primary server.
Range: 127 char string
The default is empty string.
*** allows the root or administrator user to view the shared secret.
IP address of the secondary RADIUS server.
Range: Unicast IPv4 address
The default is 0.0.0.0.
Authentication/Authorization port for secondary server.
Range: 1 – 65535
The default is 1812.
Displays the shared secret for the secondary server.
Range: 127 char string
The default is empty string.
*** allows the root or administrator user to view the shared secret.
Timeout before retrying. (Must be greater than two seconds to allow
time for SecurID server to generate a response.)
Range: 5 s – 600 s
The default is 5 s.
Allowable number of retries per server.
Range: 0 – 5
The default is 3.
Allows for local authentication if RADIUS authentication fails.
Range: Enabled/Disabled
The default is Enabled.
Selects which interface IP address is included in the NAS IP attribute in
RADIUS messages.
Range: ENET1/ENET2
The default is ENET1.
B
93