Table of Contents
Advertisement
Verify the Configuration
On a secondary APEX, the configuration is synchronized from the primary. The QAM RF
parameters, OTS configuration, and routes should all be synchronized (this process may
take a few minutes).
Verify the Status of the Pair
When logging into either the primary or secondary APEX, the status should show:
•
Redundancy State: Available
•
Communication: Connected
•
Configuration: Synchronized
•
All alarms should be OK
Notes:
1. The Primary APEX should be in Active status, and should be sourcing content.
2. The Secondary APEX should be in Standby status, and should have its RF ports
muted.
Configuration • Chassis Redundancy Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
81
Advertisement
Table of Contents
