View The System Information; Switch Local/Remote Mode - ITech IT-M3100D Series User Manual

4.2.6 View the System Information

This menu item is used to view the system information of the instrument.
The procedures to view the system information are as follows.
1. Press [Shift]+[Display] (System) to enter into the system menu interface.
2. Use left and right keys or rotate the knob to select System Info and press

4.2.7 Switch Local/Remote Mode

This series power supplies provide local operation and remote operation. The
default mode is local operation mode.
No. Parameter
3 OVP Mode
4 OVP Level
OVP Delay
5
6 OCP Mode
7 OCP Level
OCP Dealy
8
9 OPP Mode
10 OPP Level
OPP Delay
11
[Enter] key to make the parameter in modification.
The user can use left and right keys or knob to view the following system
information.
Name
Model
Ver
CommVer
SN
Last Cal
Copyright © Itech Electronic Co., Ltd.
Default Value
Off
MAX
10.00 S
Off
MAX
10.00 S
Off
MAX
10.00 S
Description
The instrument model
The control board version
The communication board version
The serial number
Last calibration date
Functions and Features
53