Connecting The Power Cord - ITech IT-M3100D Series User Manual

2.5 Connecting the Power Cord

Precautions
To prevent electric shock and damage to the instrument, observe the following
precautions.
•
•
•
•
•
•
Categories of Power Cords
The standard power cord types are as follows. Please select appropriate power
cords appropriate to local voltage based on the specifications of power cords
below. If purchased model fails to meet local voltage requirements, please con-
tact distributor or factory for change.
The power cords supplied with this product is certified for safety. In
case the supplied lines assembly needs to be replaced, or an exten-
sion lines must be added, be sure that it can meet the required
power ratings of this product. Any misuse voids the warranty of
this product.
Before connecting power cord, be sure to confirm that the power
voltage matches with the supply voltage.
Before connecting power cord, be sure to switch off the instrument.
Power switch is in Off position.
To avoid fire or electric shock, make sure to use the power cord
supplied by ITECH.
Do not use an extended power cord without protective grounding,
otherwise the protection function will fail.
Be sure to connect the main power socket to the power outlet with
protective grounding. Do not use terminal board without protective
grounding.
China United States &
IT-E171 Canada & Japan
Copyright © Itech Electronic Co., Ltd.
IT-E172
Inspection and Installation
Europe England
IT-E173 IT-E174
20